Description

Abode Althia Tap Valve

This post covers both types of mini valves that were (and are) used in the production of your Tap and gives advice regarding tools to extract your valve. We currently stock both genuine San Marco / SMR valves. The Hot opens clockwise and the Cold opens anti-clockwise.

Do you need a special tool to remove your Valve ? Check which Valve is in your own tap before removing in case you have the earlier 3308R version in your Tap. It's all covered, including pictures of both Valves, in our Guide here: Changing the SMR Mini Valve, which includes advice on how to remove either valve. No Brass Bush is required with this Tap Valve.   Here below is the 4013R Removal Tool Product if you have the earlier 3308R (SP3308) and want to order it. The 4013R Tool does NOT fit the 3794R (SP3794) with the six sided nut.  

Recently we have noticed that the new valve is a little stiffer to push the handle onto. We have reported this back to the manufacturer but they assure us that there have been no changes of any consequence and it is just to do with the tolerance on the machining of the valves. If this does occur just ensure that your own handle is clear inside of any residual debris and that you push the handle on and off the new valve a few times to loosen the splines slightly. You won’t damage your handle.

Tightening your valve: We would also recommend that you do NOT over-tighten this valve. As a rule of thumb, tighten as far as physically possible by hand, and then tighten 1/4 turn with an adjustable spanner.

If your Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.

The Hot Valve opens Clockwise. The Cold Valve opens Anti-clockwise.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.

Genuine Abode Althia Tap Parts available here
We also advise on what part is needed to save you time & money, even for older models. By fixing your Abode Tap with Genuine Abode Althia Tap Parts you prolong the life of your Abode quality product.

So many Abode Models & Discontinued Taps – Don’t worry, We are here to help you
If you don’t see the Abode  model or part that you require on our website please contact us us as we have Abode Tap Parts available that are yet online.

All the Parts you need available here

We sell from the smallest Grub screw, to Valves, Cartridges, O Ring Kits, Spouts & Handles. When you purchase Abode Tap Parts from us you can email us after you have bought it for further advice. Troubleshooting guides and DIY guides to fit all the  Abode Tap Parts are linked to the parts online. We also have Helpful Tips for the most common queries.

After Sales Service

Our expert sales team offers trusted after-sales support. With over 40 years experience, we can troubleshoot most tap issues. Fixing problems early prevents costly damage, even a small drip can lead to irreversible wear.

Many plumbers recommend replacing taps simply because the right part is hard to find. Contact us first,  we’ll identify the exact part you need, so your plumber has everything to do the job right the first time.

DIY Guides for all Taps

• Video & General Plumbing Guides
• UK Kitchen Taps Troubleshooting Guide
• Why is my Tap dripping
• How to fix a dripping Tap
• 7 Easy Steps to replace a Valve
• How to remove a Brass Bush from Valve
• How to remove the Handle on your Kitchen Tap
• How to remove a Kitchen Tap Spout
• How to replace your O‑Ring Kit
• How to replace a Cartridge from a Single Lever Tap
• What are the Splines on a Tap Valve
• How to remove your Aerator / Antisplash from your Kitchen Tap