Franke Tap Part Fun Code 133.0359.218 SP3926 CH
Please read the details below if you have an earlier Spout (Installation Guide Part listed as 3218R). Later Installation Guides have part listed as SP3926. If your Installation Guide lists Part SP3926 then you do not need to check the measurements of your own Spout.The pictures below of the O Ring Kit on the website show the O Ring Kit layout.
If you only require the O Ring Kit i.e. your Tap is dripping from the Base, and do not need to replace the complete spout, you can buy the Franke Olympus O Ring Kit here.
If you need to replace the entire Spout, and your own Installation Guide specifies 3218R Part, then we recommend that you remove your own Spout (see DIY Guide below) to take a measurement of your own Spout from the start of the groove / indentation of the largest white PTF O Ring to the very end of your Spout. It should measure c.27.9mm.
However, If your own Spout measures differently – shorter (see images below REF 3258R), then the current Olympus Spout here will still fit your Tap if your own spout is the old 3258R.
Unfortunately feedback from one customer (only) is that he had the spout on the left (see red x) and the new spout did not fit his tap BUT we could not verify this with any other customer and it could have been simply that he did not fit correctly. If you do have the Spout with the X and try the SP3926, you can of course return for a refund if it does not fit.
Here is our guide How to remove Kitchen Tap Spout.
While we check every spout carefully before dispatch, on very rare occasions Spouts can come with very minute flaws (watermark or tiny marks) in the finish. This is reflected in the marked down price of these Spouts.
Here is our guide How to change a Kitchen Tap Spout.
This is a Genuine Spare Part.
Parts might be modified by the manufacturers as part of their continual improvements.
Parts might be modified by the manufacturers as part of their continual improvements.We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.
Shipping Information - (in Brief - see links below for more detailed information).
Spares Parts: For Mainland UK / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days. For O Ring Kits (other than Perrin & Rowe) and Grub screws , we can ship Royal Mail Second Class and refund the excess shipping. Please note this in the Comment Box presented at the Shipping Address stage of your Order and we can refund the difference to you. For UK Offshore Islands, please email us email@example.com, as there is an additional surcharge. Click here for more information about all Shipping here.
Please also note that these shipping times apply to Mainland UK, NI and ROI Only. Please refer to our Shipping / Returns section for other destinations.