Blog

Tap is leaking at the base

If your Tap is leaking at the base it is hopefully just a case of replacing the O Ring Kit
O Rings are the black rubber and white hard plastic rings at the base of the Spout that you don’t see when your spout is attached to your Tap base but enable the spout to turn

If your kitchen tap is leaking at the base, it is likely that the O-ring or the washer inside the tap has worn out or become damaged. This can happen over time due to regular use, mineral buildup, or exposure to harsh chemicals. O Rings are the black rubber and white hard plastic rings at the base of the Spout that you don’t see when your spout is attached to your Tap base but enable the spout to turn

To fix the leak, you will need to turn off the water supply to the tap and then disassemble the tap. Here is our guide. How to change a Kitchen Tap O Ring Kit.. This Blog post My Kitchen Tap is dripping should explain the most common causes (and parts required) to fix a dripping Kitchen Tap.You can do this by removing the handle and then unscrewing the spout from the base. Once you have access to the inside of the tap, you can inspect the O-ring and washer for damage.

If the O-ring or washer is damaged, you will need to replace it with a new one. You can find replacement parts here , if you know the model and brand, as we have Tap Parts listed by Brand alphabetically for your convenience , and if you click on the Brand it then shows all the Taps with Pictures and you just have to then click on your Tap Picture to buy the Genuine Replacement Part, so click here OR if you know the Part Number, you can go directly to our O Ring Parts section on our Store here. Don’t despair if you do not know the model or brand. See this post here for help if you are starting at this point !

Once you have replaced the damaged part, reassemble the tap and turn on the water supply. Check for any leaks and make sure the tap is working properly. If the leak persists, you may need to call a plumber to inspect the tap and make any necessary repairs.

In addition to a damaged O-ring or washer, a leak at the base of a kitchen tap could also be caused by corrosion or tiny pinholes in the spout itself. This can happen over time due to exposure to water, chemicals, or other environmental factors.

If you have inspected the O-ring and washer and they appear to be in good condition, you may need to check the spout for corrosion or pinholes. If you notice any damage, you will need to replace the spout with a new one.

Example Pinhole in Spout

At our store, we sell genuine spouts and O-rings for a variety of kitchen taps. Our replacement parts are designed to fit your tap perfectly and provide a long-lasting solution to any leaks or other issues.

To replace the spout, you will need to follow the same steps as replacing the O-ring and washer. Once you have removed the old spout, simply attach the new one and reassemble the tap. Make sure to turn on the water supply and check for any leaks before using the tap.

Need help ? Contact us

Remember, you can contact us at any time using email or the Contact Button on the bottom left hand side on this page.  If you are unsure please email any pictures you have e.g Tap picture, together with any other relevant information e.g approx when you got your Tap (there are some  Kitchen Taps that were modified during the years of production and parts might have changed or you might need a valve with a larger seal and we can advise you on all of this.  If you know your Tap then all this relevant information will be already up on the Tap Part (and all our Parts are listed by Brand and by Model alphabetically and have pictures).  If you see your Kitchen Tap up on our website, but not the Part you require, please contact us as we don’t have every Genuine  Part up yet on our store.