Description

Franke Mythos MTV MTX MTV Tap Valve

Earlier Installation guides list 2552R Valve. Then in subsequent ones it is referred to as 1427R (SP1427) and even later ones again 3561R (SP3561)- This are all the same valves. We supply the original version of this with the white seal underneath as it is largest seal available for your Tap and the older the Tap is, the more important it is to fit the largest seal possible as it mitigates against any possible Tap modifications made over the years to your Tap that a later Valve might not address in an Earlier Tap Model. This valve will come with a white seal underneath and is known as the 4276R. It is sourced from your Tap manufacturer and is recommended by them to use in older Taps. If your own Tap installation guide specifies a later valve, 3547R (SP3547) then you can order that. Where you do not know the age of your Tap, then you could order the 4276R. We cannot take responsibility for a dripping Tap after you fit a new Valve, if it transpires that you had the the earlier valve 2552R / 1427R and ordered the later one 3547R. We have provided here measurements and images of both valves for reference if you don't have your installation guide.  Please also see below regarding the Brass Bush Part as it might be relevant also . Here is our Guide How to remove the Handle on your Kitchen Tap. if you wish to remove your handle and email us some pictures. Here is our Guide 7 easy steps to replace kitchen tap valve. /notification style="warning" font_size="12px" closeable="false"]

Measurements 4276R (2552R / 1427R) which we supply with original larger white seal underneath.
Overall height: 53mm
Nut Height: 8mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 10mm

1427R Tap Valve (Cold Valve shown here)

Measurements SP3547
Overall height: 53mm
Nut Height: 6mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 11mm

SP3547R (shown here Hot Valve)

—
For useful Guides &please check Mythos Installation Guides Tab above.

Useful Tip

If your valve seems wider in diameter than the replacement valve you order, it is possible that the Brass Bush (Ring) that surrounds the valve inside your Tap has also come away with your Valve.

Should you also require a Brass Bush (one per valve), the same part number SP3886 is used on both Hot and Cold Valve.

Old Valve 1427R inside Brass Bush 3886

Old SP3547 Valve inside Brass Bush SP3886

For more information on Changing a Valve and the Brass Bush (Ring) see here.

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.

Shipping Information : Please allow for Delays outside our control due to Covid-19 - (in Brief - see links below for more detailed information is our Normal Shipping Times if not delays).

Spares Parts: For Mainland UK / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days. For UK Offshore Islands, please email us sales@tapsandsinksonline.co.uk, as there is an additional surcharge. Click here for more information about all Shipping here.

Please also note that these shipping times apply to Mainland UK, NI and ROI Only. Please refer to our Shipping / Returns section for other destinations.