Description

This Franke O Ring Kit contains

• two white plastic rings
• two black rubber rings
•  a grub screw.
• requires a [2.5mm allen key] to remove grub screw

This O Ring Kit was previously the 3617R and then the manufacturer added in another smaller white PTFE ring at the end of the spout for stability.

You should just replace like for like, and in any case, we recommend not replacing white PTFE rings unless damaged or broken.

The Spout code 2553R / SP2553 remains unchanged irrespective of whether your own spout has 3 rings (3617R/SP3617) or the 4 rings (2268R / SP2268)

Kitchen Spout 2553R w. 3617R O Ring Kit

O Rings
If your Tap is leaking at the joint of the body of the tap and the spout then you might need to replace your O-rings. See our Guide here.

For step-by-step help with fixing common issues, check out our Kitchen Tap Repair Guide Hub.

Check for Pinhole Damage Before Ordering O-Rings

• Always inspect your tap spout for pinhole damage before ordering a new set of O-rings.
• If your spout has a pinhole (see example below), replacing the O-ring kit won't resolve the issue.
• In such cases, you'll need to replace the entire spout.
• Refer to our guide: How to Remove a Kitchen Tap Spout to check for pinholes.
• If you're uncertain about the spout you need, contact us with details of your tap, such as a picture and any brand markings, so we can assist you in finding the correct spout.

Tips When Changing the O-Ring Kit

• Usually, only the black O-rings need replacing unless one of the white O-rings is damaged.
• Some white O-rings have an intentional split for use in spouts with a grub screw; a split does not indicate it's broken.
• Your new O-ring kit may include extra rings not needed for your spout, as some kits were later updated with a smaller ring for added stability.
• Use plumber's grease or washing-up liquid to aid movement, but avoid Vaseline as it can damage the rubber.

For step-by-step help with fixing common issues, check out our Kitchen Tap Repair Guide Hub.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.